Voltage: 0.6/1KV
Conductor: Aluminum or Copper
Insulation: PVC
Cores: 1,2,3,4,5,3+1,4+1,3+2
Standard: IEC 60502, BS 7870, GB/T12706 Etc.
Packaging: Iron Or Wooden Drum
Description:
Core:1,2,3,4,5,3+1,3+2,4+1, cores
Conductor: Cu or Aluminum, Insulation:PVC Sheath: PVC
Sheath Color: Black or Colors
PVC insulated PVC sheathed power cable (PVC/PVC Cable)
Flame retardant PVC insulated PVC sheathed power cable (FR/PVC/PVC Cable)
Application:
1. PVC power(fire resistant) cables suitable for electrical power transmission and distribution lines with AC rated voltage U0/U up to and including 0.6/1 kV.
Note: the single core armored cables are used for D.C. system only. As for A.C. system, armor layer should be used of non-magnetic material or magnetic isolation measures.
2.It to be used for outdoor and indoor installation in damp and wet locations, in tunnel, in down wells,cable furrow or pipe,underground.
Standard:
BS 7870-3.10-2001 orIEC 60502, BS, DIN, or others as per customer’s country
Working:
1.The long time working temperature is at 90℃, suffer short circuit (within 5
seconds), the temperature of core can not higher than 250℃
2.The ambient temperature should not lower than -10℃
3.The laying temperature should not lower than 0℃
4.Single core’s bend radius with no armor should not exceed 20D,single core’s bend
radius with armor should not exceed than 15D,three cores’ bend radius with armor
should not exceed 12D.
Type | Name | Application | ||||
---|---|---|---|---|---|---|
Cu Conductor | Al Conductor | |||||
VV | VLV | Copper/Aluminium core,PVC insulated,PVC sheathed power cable | Non-armoured PVC cable are suited for laying indoors,In cable trench,On cable racks and in pipes. Unable bear external pressures and tensions | |||
VV | VLV | Copper/Aluminium core,PVC insulated,PE sheathed power cable | ||||
Type | No. of Core | Nominal cross-section of conductor mm2 | ||||
Cu(AL)/PVC/PVC | 1,2,3,4,5 , 3+1,4+1,3+2 | 1.5-1000 | ||||
Number of Cores & Nominal Cross-section Area | ||||||
Number of Cores | 1 | 2 | 3 | 3+1 | 4 | 4+1 |
Section Area (mm 2 ) | 1.5 - 500 | 1.5 - 500 | 2.5 - 300 | 4 - 300 | 2.5 - 300 | 2.5-300 |